wp-content/uploads/2026/01/Mosquito-Bites-Series-Thumbnail.jpg
Mosquito Bites Video Series

This blog series is a companion to the video series on my YouTube channel, intended for quicker format shop note style videos

  • Mosquito Bites #1: Bandsaw Log Sled
    • wp-content/uploads/2023/01/simple-mod-thumbnail.jpg
    Jam Packed

    Mosquito aka Chris works on modifying an InWin A1 computer case to fit entirely too much hardware; dual GPU and fully watercooled in an ITX chassis building a custom reservoir in the process

  • The Simple Mod
  • New Top Window
  • Fitting the Radiator
  • Installing the Radiator
  • Mounting GPUs Vertically
  • Jam Packed – Looking at Reservoir Options
  • Top Panels
  • Custom Reservoir
  • Dust Off
  • Putting the Pieces Back Together
  • 2 GPUs with ITX?
    • wp-content/uploads/2023/01/Bit_Fenix_Portal_Watercooled_45-1.jpg
    Watercooled BitFenix Portal

    Mosquito aka Chris and Mike aka …Mike set out to watercool Mike’s BitFenix computer case, with a full custom loop including CPU and GPU watercooling

  • Getting Started
  • Making Some Cuts
  • Installing the Water Loop
  • Wrapping Up
  • The Video
    • wp-content/uploads/2022/09/Veritas_Combination_Comparison_11.jpg
    Veritas Combination Plane Comparative Review

    A comparative review of the Veritas Combination plane along with Stanley #45 types

  • Introduction
  • General Comparison
  • Iron Comparison
  • Rods & Fence Comparison
  • Thoughts on use
  • My Conclusions
    • wp-content/uploads/2023/01/Mosquito_Made_IBM_PC-AT_90.jpg
    IBM PC-AT Reborn

    Case mod to gut and rebuild the interior of an 1980’s IBM PC-AT to fit modern hardware. This is a preservation of a project log from 2011

  • Introduction
  • Emptying the Box
  • Frame & Back Panel
  • Installing Fans
  • Monitor Mod
  • Cabling & Test Mockup
  • Painted & Completed
    • 1 2