Jam Packed – The Simple Mod
Mosquito aka Chris sets out to build a custom watercooled A1 case mod, with only a minimum set of modding
Series: Jam Packed
Mosquito aka Chris works on modifying an InWin A1 computer case to fit entirely too much hardware; dual GPU and fully watercooled in an ITX chassis building a custom reservoir in the process
Jam Packed – New Top Window
Mosquito aka Chris starts taking apart the InWin A1 case and starts modding by removing the top panel and adding a case window to the top
Jam Packed – Radiator Fitment
Mosquito aka Chris Tackles the problem of fitting a radiator in the bottom of the A1 case, and testing out some hardware configurations to prove out the theory
Jam Packed – Installing the Radiator
Mosquito aka Chris cuts open the bottom of the chassis to fit the radiator he knows he needs to.
Jam Packed – Mounting GPUs Vertically
Mosquito aka Chris sets out to make his own vertical dual GPU mounting bracket and install it on the A1
Jam Packed – Looking at Reservoir Options
Mosquito aka Chris starts taking a look at how to get a reservoir and pump in the A1 mod, and does a mock up with some hardware
Jam Packed – Top Panels
Mosquito aka Chris makes a couple of top panels for the A1
Jam Packed – Custom Reservoir
Mosquito aka Chris digs in on making a custom reservoir for this compact build
Jam Packed – Dust Off
Mosquito aka Chris returns to blow the dust off the project (literally), and overview of plans going forward
Jam Packed – Putting the Pieces Back Together
Mosquito aka Chris works on putting the whole system together to see how it works