Case Mods

Mosquito aka Chris talks about how the two GPUs work with the ITX system that normally only has one

Mosquito aka Chris works on putting the whole system together to see how it works

Mosquito aka Chris returns to blow the dust off the project (literally), and overview of plans going forward

Mosquito aka Chris digs in on making a custom reservoir for this compact build

Mosquito aka Chris makes a couple of top panels for the A1

Mosquito aka Chris starts taking a look at how to get a reservoir and pump in the A1 mod, and does a mock up with some hardware

Mosquito aka Chris sets out to make his own vertical dual GPU mounting bracket and install it on the A1

Mosquito aka Chris cuts open the bottom of the chassis to fit the radiator he knows he needs to.

Mosquito aka Chris Tackles the problem of fitting a radiator in the bottom of the A1 case, and testing out some hardware configurations to prove out the theory

Mosquito aka Chris starts taking apart the InWin A1 case and starts modding by removing the top panel and adding a case window to the top